The usage method and effect of antifreeze white latex
When using white latex, the stick can be diluted with water appropriately depending on the bonding object It is better to dilute with water at 30-40 ℃ instead of cold water When bonding wood, the amount of glue applied can be determined according to the specific purpose, usually applied to two bonding surfaces After bonding, let it sit for a moment and then press it down with a pressure of 3-5 kg/cm ² for 3 hours At this point, the strength can reach about 70-80% of the adhesive strength. Complete curing takes 8-16 hours.
If the heating curing method is used, the curing time can be shortened, usually by heating and curing at around 80 ℃ under a pressure of 3-5 kg/cm2 Thin plates only need to be pressed for a few minutes, while thick plates require an appropriate extension of time.
中文
日本語